EMU-75 has the most widely used ‘U’ shaped soft iron yoke. The soft iron is of a special quality, structurally uniform, well machined and finished to meet the rigid standards.

The pole pieces are made from dead annealed soft iron blocks of the best quality available. They are well shaped, machined and finished. The air-gap is continuously variable upto 75mm with two way knobbed wheel screw adjusting system. Normally flat pole pieces are supplied. Tampered pole pieces can be supplied on special request.

The coils are wound on non-magnetic formers with uniform layers of S.E. copper wire. The new and modern design of the coils provides good thermal conductivity characteristics and eliminates troublesome hot spots even at high magnetic fields.


Field Intensity    11KG at 10mm air-gap with flat pole pieces
Pole Pieces   75mm diameter
Energizing Coils Two,each having a resistance of about 12W
Power Requirement

0-90Vdc,3A,if coils are connected in series.0-45Vdc,6A,if coils are connected in parallel

Weight   81Kg

DPS-175-C2 is designed to be used with the Electromagnet, Model: EMU-75 as a constant current power supply to generate magnetic field upto 11KG. The current requirement of 3A per coil, i.e. a total of 6A is met by connecting six closely matched constant current sources in parallel. In this arrangement the first unit works as the ‘master’ with current adjustment control.
All others are ‘slave’ units generating exactly the same current as the master. All the six constant current sources are individually IC controlled.Four options are provided for adjusting current.




Through Up/Down push button switches.

Controlled through a dc voltage 0-10V obtained from dSpace or otherwise.

The unit can be connected directly to a PC through an USB.SES-Data Access And Control is a built-in interface which gives user an option to store a value as displayed on the meter and
tabulate it by
the click of a button on the screen.Alternatively the data may be automatically entered into a table at user selectable interval.An 'END' button on the screen terminates the automatic tabulation.The Data stored in the table may then be displayed as a graph on the screen and may also be stored in an excel file for further processing.The software supplied with the unit is menu driven and simple to operate.

4)SES-CAMM: The unit can also be connected to PC through an interface module SES-CAMM.SES-CAMM is computer aided module for connecting multiple subunits of experiments, such as Two Probe Setup to same interface on a computer.This feature is particulary useful in making this model compatible with computerized versions of complete experiments from our company.


Current Range Up/Down switch operated,0-3A per coil,i.e.6A
Load Regulation 0.1% for load variation from 0 to max.
Line Regulation 0.1% for ±10% mains variation
Display 3½ digit, 7 segment LED DPM
Intefacing USB
Software DACC and CAMM,both Window compatible
Power 220V ±10%, 50Hz
Weight 13Kg
Dimensions 340mm X 350mm X 235mm

Computer is not include with the instructions 


SES Instruments Pvt. Ltd.
452, ADARSH NAGAR, ROORKEE-247 667, U.K. (INDIA) Phone : +91-1332-272852, 277118, Fax: 277118
Email: info@sestechno.com , sestechno.india@gmail.com

© 2003 SES. All rights reserved.